
10 products
Stands, rollers and baskets
Stands, media rollers and collection baskets for each V-Smart width.
Cutting Platforms & Collectors

Collection Basket with 1270mm Basket and 1500mm Supporting Bars, for AM.CO.ZA V-Smart 1310mm, V-Smart Plus 1360mm and V-Auto 1500mm Vinyl Cutter
Keep your vinyl-cutting workspace clean and organised with the V3-B1500 Collection Basket.

Collection Basket with 1570mm Basket and 1800mm Supporting Bars, for AM.CO.ZA V-Smart Plus 1660mm and V-Auto 1800mm Vinyl Cutter
The V3-B1800 is a practical collection basket designed for the AM.CO.ZA V-Smart Plus 1660mm and V-Auto.
Collection Basket with 670mm Basket and 900mm Supporting Bars, for AM.CO.ZA V-Smart 740mm and V-Auto 900mm Vinyl Cutter
Keep your vinyl cutting workspace clean, organised and efficient with the V3-B900 Collection Basket.

Cutting Platform for AM.CO.ZA V-Smart 440mm Working Area Vinyl Cutter, Single Piece
The V3-P440 is a single-piece replacement cutting platform designed for AM.CO.ZA V-Smart vinyl cutters with.

Cutting Platform for AM.CO.ZA V-Smart 740mm Working Area Vinyl Cutter, Single Piece
Upgrade or replace the working surface on your V-Smart 740mm Vinyl Cutter with this genuine single-piece.
Aluminium Media Roller Bar with Bearings of 1310mm Length for V3-1310 V-Smart Vinyl Cutter (Each)
The V3-ROLLER/1310 Aluminium Media Roller Bar is designed for the V3-1310 V-Smart vinyl cutter.
Aluminium Media Roller Bar with Bearings of 1360mm Length for V3-1360 V-Smart Plus Vinyl Cutter (Each)
The V3-ROLLER/1360 is a 1360mm aluminium media roller bar designed for the AM.CO.ZA V3-1360 V-Smart Plus.
Aluminium Media Roller Bar with Bearings of 1660mm Length for V3-1660 V-Smart Plus Vinyl Cutter (Each)
The V3-ROLLER/1660 Aluminium Media Roller Bar is a replacement support roller designed for the V3-1660.
Aluminium Media Roller Bar with Bearings of 740mm Length for V3-740 V-Smart Vinyl Cutter (Each)
Keep your V3-740 vinyl cutter’s media supply properly supported with the V3-ROLLER/740 Aluminium Media.

Aluminium Stand for AM.CO.ZA V-Smart 740mm Working Area Vinyl Cutter
Upgrade your vinyl-cutting setup with the V3-S740, a purpose-built aluminium stand for the AM.CO.ZA V-Smart.
Read before you order

V-Smart or V-Smart+Plus
Both cut the same vinyl. The Plus reads registration marks by itself, which matters once print and cut work becomes daily work.

Blade holder, pressure and depth
Cut through the vinyl and just mark the backing. Set the blade depth first, then the pressure.
Feeding vinyl straight over long jobs
Long jobs drift when the vinyl is loaded skew or the rollers are worn. Load it square and the cutter holds the line.

Connecting a V-Smart and powering it
Plug it in, choose the right driver, and send the job. The V-Smart speaks the same languages as most sign software.